Pulsafeeder Pulsar ECA NEMA4X Manual do Utilizador descarregar pdf (Página 15)

6.4 Housing Access

All wiring and programming of the ECA must be accomplished through the removal of the

housing cover. Use this procedure for removal and replacement:

Cover Removal

• Disconnect power at the source (follow your local Lock-Out-Tag-Out procedures).

• Disconnect power at the source.

• Loosen and remove the 4 Phillips head screws which secure the rear cover.

• Grasp the cover and lift straight up.

Figure 1

Cover Re-installation

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 37 38

Sem comentários

Pulsafeeder Pulsar ECA NEMA4X Manual do Utilizador Página 15